@BigGPlace2 หลายเดือนก่อน +2
Another fantastic video sir! That was me responding. Sounds as if I came across a little scratchy, working from an HT via my hotspot. Your signal came through very clear, as if we were talking on the phone. 73! KJ5FMX
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Hi yes was fun .
@louisbaten42322 หลายเดือนก่อน +2
Never tought that they ever bring a new firmware for this radio!
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Me same.
@mikesey12 หลายเดือนก่อน +1
If only I could afford a 991A!
As it happens though, I DO like my 897D, the forerunner of the 991. I fear that modern radios from Yaesu, Icom & Kenwood now have so MANY things that can go wrong that I could never repair myself, that they are not a viable option if longevity is required. My FT-897D (circa 2003) is built like a tank, and has a small display but great performance. It is almost military hardened and shall do fine in an emergency situation involving EMP.@HamTechRadioScannerDrones 2 หลายเดือนก่อน
I understand but the 991a lasts for ever it's worth the extra cost even tyeb897bis very hard to repair.
@thegingamanหลายเดือนก่อน +1
I understand from the forums that they've pulled this update.
@HamTechRadioScannerDrones หลายเดือนก่อน
Yes but will be back soon they discovered a small bug .
@thegingamanหลายเดือนก่อน
@@HamTechRadioScannerDrones HamTech , They've released Firmware Ver. 02-07 today
@ronsworldnl2 หลายเดือนก่อน +1
It looks like they removed the new software at the Yaesu site, maybe there is a bug??
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Yes interesting
@ronsworldnl2 หลายเดือนก่อน +1
Implements improvements:
Updates: MAIN V02-06 for web release (2024/06)
1. Fixed the issue where the displayed frequency would change when QMB was operated during
PMS.
2. Changed the behavior of the A/B key during PMS to swap VFO A/B.
3. Fixed the issue where the MIC EQ did not work when transmitting with VOX.
4. Other functional improvements and optimizations have been made.@HamTechRadioScannerDrones 2 หลายเดือนก่อน +1
Thanks
@BradleyBrown2 หลายเดือนก่อน +2
I was searching for a changelog and couldn't find anything. Thanks for sharing!
@ronsworldnl2 หลายเดือนก่อน
@@BradleyBrown It looks like Yaesu removed the new software from the site.
@simonbussey7530หลายเดือนก่อน +1
It's back @@ronsworldnl
@ronsworldnlหลายเดือนก่อน
@@simonbussey7530 Will wait a bit before updating. Old(er) version(s) is(are) not available so there is no way back unfortunately.. And not really sure if it makes a difference.
@RadioaficionadosEspanaหลายเดือนก่อน
I went to change the firmware and it was no longer there, although I had previously downloaded it but I don't dare to install it in case there is some hidden problem that they haven't mentioned.
They should have at least written a note for the people who downloaded it from the website, explaining why.@HamTechRadioScannerDrones หลายเดือนก่อน
My guess is they found a bug and will release it again .
@Alex-2E0KUD2 หลายเดือนก่อน
SSB receive sounds cleaner and brighter. Even with DNR switched off. Maybe it’s a placebo effect lol
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Lol yes maybe I will try it out .73
@mickreeson69582 หลายเดือนก่อน
Hey Andreas
Has the 991A firmware been removed? cant see it anay longer?@HamTechRadioScannerDrones หลายเดือนก่อน +1
I would wait for Yaesu to release it again
@cezarbadita6935หลายเดือนก่อน
This firmware allows us to switch the european to a american settings?
It would be nice to able to transmitt in PMR whiteout going to service mod...@HamTechRadioScannerDrones หลายเดือนก่อน
No sorry
@bradkellison5359หลายเดือนก่อน
This update is not on the USA yaesu site so it must be the EU version only or they took it offline.
@HamTechRadioScannerDrones หลายเดือนก่อน
They took it off
@radioholicy2 หลายเดือนก่อน
How it is possible that I can't see these links with FW, on my web browser...?
@ronsworldnl2 หลายเดือนก่อน
Because they removed it.
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Oh wonder why
@radioholicy2 หลายเดือนก่อน
@@HamTechRadioScannerDrones Please reply to my email. I found it on qrz
@bgfotopl2 หลายเดือนก่อน
Is it possible to save the settings before introducing new software?
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Yes there is SOFTWARE
@ronsworldnlหลายเดือนก่อน
Search for FTRestore Works perfect, also for your memory channels.
@bgfotopl2 หลายเดือนก่อน
Are my settings reset after updating the radio?
@BradleyBrown2 หลายเดือนก่อน
If you follow the last step of holding F M-List afterwards, yes. I skipped that step on mine. Firmware upgrade otherwise seemed to work fine.
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Yes as at the end you factory reset .
@Pacman1632 หลายเดือนก่อน
I did the firmware update and A/B does nothing.
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Agree
@Alex-2E0KUD2 หลายเดือนก่อน
The A/B still behaves the same way. The text on screen will still say VFO A but it’s in fact switching between A and B each time you press it. To confirm this yourself set the radio on a HF band, press A/B button and you will see the VFO information change.
@Pacman1632 หลายเดือนก่อน +1
@@Alex-2E0KUD Mine does that in the last firmware V02-04 the only thing is it does not say which vfo you on. I did the new update V02-06 and hit A/B and it would not do anything for me so I went back to V02-04
@Alex-2E0KUD2 หลายเดือนก่อน
@@Pacman163 oooh I get you now. Thanks I will avoid the update as well then.
@ronsworldnl2 หลายเดือนก่อน
@@Pacman163 Could you share a link for the download of version 02-04? For those who want to get the old version back, I don't see it at the Yaesu download page.
@philippephil37712 หลายเดือนก่อน
Wait, update removed by Yaesu.
@HamTechRadioScannerDrones 2 หลายเดือนก่อน
Yes
@thexaerom2 หลายเดือนก่อน
Похоже на то что обновление больше не доступно на сайте.
@HamTechRadioScannerDrones 2 หลายเดือนก่อน +1
Hopefully they will tweak it then bring it back .
@michaelwenman2348หลายเดือนก่อน
I was going to ask if this fixed the A/B indicator bugs, but I see that it does not so why bother with the update then ...bah..waste of a firware update if it don't fix stuff.
@HamTechRadioScannerDrones หลายเดือนก่อน
Ok
@michaelwenman2348หลายเดือนก่อน
@@HamTechRadioScannerDrones I called Yaesu and spoke with Roger there. He said that in the far upper left corner there will NEVER be VFO-B displayed. Where the VFO-B LED's are above the VFO knob, ONLY the red light will be shown when the SPLIT button is pushed. When in Split mode, then a 2nd freq will be displayed as VFO-B above the waterfall and then pressing the A/B button will alternate between the VFO-A and VFO-B frequencies so no bug as one would think.
FAQs
How to update firmware FT-991A? ›
Press and hold the [POWER] key while pressing the [F(M-LIST)] key on the transceiver's main panel, turning on the transceiver's power (Reset procedure). 12. Confirm that the unit's power has turned on, and press and hold the [POWER] to turn it OFF. This completes the firmware upgrading process.
How do I connect my FT-991A to my computer? ›The FT-991A transceiver has a built-in USB to Dual UART Bridge, allowing direct connection from the rear-panel USB jack to the USB jack of your computer without the need of any external boxes. You will need a USB cable to connect to the USB jack on your computer.
What is the difference between a Yaesu FT-991 and an FT-991A? ›The FT-991A
The main difference between it and the original FT-991, is the ability to have the spectrum monitor running at the same time as transmitting and receiving. Personally, I think this is a 'must have', so if you can find a good FT-991A, I'd get that instead of the original FT-991.
Internal High Speed Automatic Antenna Tuner included in the package.
How do I update my audio firmware? ›- Make sure you've registered your products with Audinate - if not, you can do it here.
- Go to this page on Audinate's website and look up your model.
- Download the free Dante Firmware Update Manager app.
- Follow the instructions in the app and you're all set!
The YAESU FT-991 with its built-in soundcard allows easy operation of soundcard based digital modes like FT8, VARA, VARA FM, Packet 1200, WINMOR, ARDOP. Just a standard USB cable is needed between a PC and the FT-991.
What is the frequency coverage of FT 991a? ›Frequency coverage: Receive, 0.030 – 56, Receive and transmit, as specified. 118 – 164, 420 – 470 MHz.
How do I connect my FTDX10 to my computer? ›The FTDX10 transceiver has a built-in level converter, allowing direct connection from the rear-panel RS-232C jack to the serial port of your computer without the need of any external boxes. You will need a serial cable for connection to the RS-232C (serial or COM port) connector on your computer.
Is Yaesu Chinese or Japanese? ›Yaesu is a Japanese brand of amateur radio equipment, founded as Yaesu Musen Co., Ltd.
Is Yaesu FT 450D discontinued? ›The FT-450D is no longer in production however it is still supported by Yaesu.
When did the Yaesu 991 come out? ›
The FT-991 was released in 2015 and the FT-991A replaced it in 2016. The major difference between the two models is that the FT-991A has a 'real time' spectrum scope with a multi-colored waterfall display.
How do I update my Ubiquiti controller firmware? ›Log in to the UniFi Site Manager or connect locally. Navigate to the Applications screen of your UniFi Console. Available updates are displayed next to the current OS version, and initiated by clicking Update.
How do I update my Crestron firmware? ›- Tap Check for Device Updates. The Crestron Home system searches for available firmware updates. Once the scan is complete, the Device Firmware Update screen presents a list of devices with recommended firmware updates. NOTES: ...
- Select the devices you want to update.
- Tap Update Selected Devices.
Press and hold down the record (round) button while the Edison is off, then, keeping the button held down, turn the Edison on. Keep holding the record (round) button until the two red LED lights are stuck on. This means you are in 'firmware update mode' and you can now release the button and run the firmware update.